JiuJiang BeiHai Brand National Standard Wall-Mounted Household 7kw 220V AC Electric Car Charger ICE2 Type2 EV Charging Station

Short Description:

AC charging pile is a specialized power supply device that provides AC power for electric vehicles and charges electric vehicles with on-board charging devices by conduction.

The output of the AC charging post is equipped with a charging plug for charging electric vehicles. The core of this type of charging pile is a controlled power outlet, and the output power is in AC form, relying on the vehicle’s built-in charger for voltage adjustment and current rectification.

AC charging piles are suitable for daily scenarios such as homes, neighborhoods, and office buildings, and are currently the charging method with the highest market share due to easier installation, lower site requirements, and lower user recharge costs.

AC input voltage range (V): 220±15%

Frequency Range (H2): 45~66

Output power (KW): 7KW/22KW

Maximum Output Current (A): 32A

level of protection: IP65

heat dissipation control: natural cooling

Send email to us

Product Detail

Product Tags

Product Description:

The 7KW charging pile belongs to the national standard AC pile, which can charge the electric car with its own on-board charger, the power is actually controlled by the charger, and the output current of the charging pile is 32A when it is about 7KW power.
The advantage of 7KW AC charging pile is that the charging speed is slower, but relatively stable, suitable for use at home, office and other places. Because of its lower power, it also has less impact on the load of the power grid, which is helpful for the stability of the power system. In addition, the 7kw charging pile has a longer service life, lower maintenance costs and higher reliability.

Product Parameters：

7KW AC dual port (wall and floor) charging pile
unit type	BHAC-B-32A-7KW
technical parameters
AC input	Voltage range (V)	220±15%
AC input	Frequency range (Hz)	45~66
AC output	Voltage range (V)	220
	Output Power (KW)	7
	Maximum current (A)	32
	Charging interface	1/2
Configure Protection Information	Operation Instruction	Power,Charge,Fault
	machine display	No/4.3-inch display
	Charging operation	Swipe the card or scan the code
	Metering mode	Hourly rate
	Communication	Ethernet(Standard Communication Protocol)
	Heat dissipation control	Natural Cooling
	Protection level	IP65
	Leakage protection(mA)	30
Equipment Other Information	Reliability (MTBF)	50000
	Size (WDH) mm	2701101365 (Landing)270110400 (Wall mounted)
	Installation mode	Landing type Wall mounted type
	Routing mode	Up (down) into line
Worksing Environment	Altitude (m)	≤2000
	Operating temperature(℃)	-20~50
	Storage temperature(℃)	-40~70
	Average relative humidity	5%~95%
Optional	4GWireless Communication Or Charging gun 5m

Product Feature：

Application：

Home charging: AC charging posts are used in residential homes to provide AC power to electric vehicles that have on-board chargers.

Commercial car parks: AC charging posts can be installed in commercial car parks to provide charging for electric vehicles that come to park.

Public Charging Stations: Public charging piles are installed in public places, bus stops and motorway service areas to provide charging services for electric vehicles.

Charging Pile Operators: Charging pile operators can install AC charging piles in urban public areas, shopping malls, hotels, etc. to provide convenient charging services for EV users.

Scenic spots: Installing charging piles in scenic spots can facilitate tourists to charge electric vehicles and improve their travelling experience and satisfaction.

Ac charging piles are widely used in homes, offices, public parking lots, urban roads and other places, and can provide convenient and fast charging services for electric vehicles. With the popularization of electric vehicles and the continuous development of technology, the application range of AC charging piles will gradually expand.