IP65 AC 220V EV Charging Pile 3.5kw 7kw Single Double Gun Commercial Charging Station

Short Description:

Ac charging pile is a device used to charge electric vehicles, which can transfer AC power to the battery of the electric vehicle for charging. Ac charging piles are generally used in private charging places such as homes and offices, as well as public places such as urban roads.The charging interface of AC charging pile is generally IEC 62196 Type 2 interface of international standard or GB/T 20234.2 interface of national standard.
The cost of AC charging station is relatively low, the scope of application is relatively wide, so in the popularity of electric vehicles, AC charging pile plays an important role, can provide users with convenient and fast charging services.

AC input voltage range (V): 220±15%

Frequency Range (H2): 45~66

Output power (KW): 3.5/7kw

Maximum Output Current (A): 16/32A

level of protection: IP65

heat dissipation control: Natural Cooling

Charging operation: swipe or scan

Send email to us

Product Detail

Product Tags

Product Description:

AC charging piles is high charging power. In contrast, DC charging piles can provide higher charging power, but expensive equipment costs make it difficult to promote.AC charging station is different, its equipment cost is cheaper, and through the management of voltage, current and other parameters, the charging power can be increased.

AC charging station generally provide conventional charging and fast charging two charging methods, people can use a specific charging card in the charging pile provided by the human-computer interaction interface to use the card, the corresponding charging operation, the charging pile display can show the charging amount, cost, charging time and other data.

Product Parameters：

7KW AC Double Gun (wall and floor) charging pile
unit type	BHAC-3.5KW/7KW
technical parameters
AC input	Voltage range (V)	220±15%
AC input	Frequency range (Hz)	45~66
AC output	Voltage range (V)	220
	Output Power (KW)	3.5/7kw
	Maximum current (A)	16/32A
	Charging interface	1/2
Configure Protection Information	Operation Instruction	Power,Charge,Fault
	machine display	No/4.3-inch display
	Charging operation	Swipe the card or scan the code
	Metering mode	Hourly rate
	Communication	Ethernet(Standard Communication Protocol)
	Heat dissipation control	Natural Cooling
	Protection level	IP65
	Leakage protection(mA)	30
Equipment Other Information	Reliability (MTBF)	50000
	Size (WDH) mm	2701101365 (Landing)270110400 (Wall mounted)
	Installation mode	Landing type Wall mounted type
	Routing mode	Up (down) into line
Worksing Environment	Altitude (m)	≤2000
	Operating temperature(℃)	-20~50
	Storage temperature(℃)	-40~70
	Average relative humidity	5%~95%
Optional	4G Wireless Communication	Charging gun 5m

Product Feature：

Application：

Home charging: AC charging posts are used in residential homes to provide AC power to electric vehicles that have on-board chargers.

Commercial car parks: AC charging posts can be installed in commercial car parks to provide charging for electric vehicles that come to park.

Public Charging Stations: Public charging piles are installed in public places, bus stops and motorway service areas to provide charging services for electric vehicles.

Charging Pile Operators: Charging pile operators can install AC charging piles in urban public areas, shopping malls, hotels, etc. to provide convenient charging services for EV users.

Scenic spots: Installing charging piles in scenic spots can facilitate tourists to charge electric vehicles and improve their travelling experience and satisfaction.

Ac charging piles are widely used in homes, offices, public parking lots, urban roads and other places, and can provide convenient and fast charging services for electric vehicles. With the popularization of electric vehicles and the continuous development of technology, the application range of AC charging piles will gradually expand.