7KW 22KW Double Gun Wall Mounted EV AC Charging Station Type1 Type2 GBT EV AC Charger

Short Description:

An AC charging  pile, also known as a “slow-charging” charging post, has at its core a controlled power outlet that outputs electricity in AC form.The power of AC charging pile is generally smaller, the common power charger type is 7 kW AC charger and 22 kW EV charging station, the installation is more flexible, can adapt to the needs of different scenarios It transmits 220V/50Hz AC power to the electric vehicle through the power supply line, then adjusts the voltage and rectifies the current through the vehicle’s built-in charger, and ultimately stores the power in the battery. During the charging process, the AC charging post is more like a power controller, relying on the vehicle’s internal charge management system to control and regulate the current to ensure the stability and safety of the current.


  • AC input voltage range (V): 220±15%
  • Frequency Range (H2): 45~66
  • Output power (KW): 7KW/22KW
  • Maximum Output Current (A): 32A
  • level of protection: IP65
  • heat dissipation control: natural cooling
  • Charging operation: swipe or scan
  • Product Detail

    Product Tags

    Product Description:

    AC charging piles is high charging power. In contrast, DC charging piles can provide higher charging power, but expensive equipment costs make it difficult to promote.AC charging station is different, its equipment cost is cheaper, and through the management of voltage, current and other parameters, the charging power can be increased.

    AC charging station generally provide conventional charging and fast charging two charging methods, people can use a specific charging card in the charging pile provided by the human-computer interaction interface to use the card, the corresponding charging operation, the charging pile display can show the charging amount, cost, charging time and other data.

    advantage-

    Product Parameters:

    7KW AC Double Gun (wall and floor) charging pile
    unit type BHAC-32A-7KW/22KW
    technical parameters
    AC input Voltage range (V) 220±15%
    Frequency range (Hz) 45~66
    AC output Voltage range (V) 220
    Output Power (KW) 7/22
    Maximum current (A) 32
    Charging interface 1/2
    Configure Protection Information Operation Instruction Power,Charge,Fault
    machine display No/4.3-inch display
    Charging operation Swipe the card or scan the code
    Metering mode Hourly rate
    Communication Ethernet(Standard Communication Protocol)
    Heat dissipation control Natural Cooling
    Protection level IP65
    Leakage protection(mA) 30
    Equipment Other Information Reliability (MTBF) 50000
    Size (W*D*H) mm 270*110*1365 (Landing)270*110*400 (Wall mounted)
    Installation mode Landing type Wall mounted type
    Routing mode Up (down) into line
    Worksing Environment Altitude (m) ≤2000
    Operating temperature(℃) -20~50
    Storage temperature(℃) -40~70
    Average relative humidity 5%~95%
    Optional 4G Wireless Communication Charging gun 5m

    Product Feature:

    PRODUCT  DETAILS  DISPLAY-

    Application:

    Home charging: AC charging posts are used in residential homes to provide AC power to electric vehicles that have on-board chargers.

    Commercial car parks: AC charging posts can be installed in commercial car parks to provide charging for electric vehicles that come to park.

    Public Charging Stations: Public charging piles are installed in public places, bus stops and motorway service areas to provide charging services for electric vehicles.

    Charging Pile Operators: Charging pile operators can install AC charging piles in urban public areas, shopping malls, hotels, etc. to provide convenient charging services for EV users.

    Scenic spots: Installing charging piles in scenic spots can facilitate tourists to charge electric vehicles and improve their travelling experience and satisfaction.

    Ac charging piles are widely used in homes, offices, public parking lots, urban roads and other places, and can provide convenient and fast charging services for electric vehicles. With the popularization of electric vehicles and the continuous development of technology, the application range of AC charging piles will gradually expand.

    7KW AC Dual Port (wall-mounted and floor-mounted) Charging Post

    appliance

    Company Profile:

    About Us

    DC Charge Station


  • Previous:
  • Next:

  • Write your message here and send it to us